General information
| DALI Product ID | 13580 |
|---|---|
| Product Name | IFS05D2-CTB-BLK |
| Brand Name | LiteScape |
| Status | Certified: DALI-2 |
| Product Part Number | IFS05D2-CTB-BLK |
| GTIN | 00810233690028 |
| Bus unit configuration | - |
Testing
| Test conditions | Family member of IFS05D2-CTB-WHT (DiiA Product ID 13579). Differs only in housing colour; same DALI circuit, hardware version 1.0 and firmware version 1.0 as the family reference product. Tested in-house at ambient temperature using the Probit test system ProbitLab2 (hardware ID 361, firmware 4.14) with ProbitBench 4.7.1.0 and DiiA V2 test sequences version 2.7.0.0, DALI edition 2. The DUT is bus-powered from the test system and contains no auxiliary power supply. Tests carried out on this product in operating mode 0x00 at factory-default settings: IEC 62386-103 test 2.1 (test preamble) and test 6.1 (READ MEMORY LOCATION on memory bank 0), 2 tests, 0 failures, 0 errors, 0 warnings. MB0 readout confirms GTIN 810233690028 and hardware/firmware version 1.0. All other test results: refer to the family reference product. |
|---|---|
| Test type | None |
| Family reference product ID | 13579 |
| DALI test sequence software version | 2.7.0.0 |
Technical
Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | 10 |
|---|---|
Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 0 |
Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 0 |
Hardware/firmware information If multiple versions exist then contact the manufacturer for details of the older versions.
If multiple versions exist then contact the manufacturer for details of the older versions.
| Hardware version | 1.0 |
|---|---|
| Firmware version | 1.0 |
Product reference product description
IFS05D2 series: bus-powered DALI-2 multi-sensor input devices with no auxiliary supply. Each product provides one logical control device unit with an occupancy/movement sensor instance (instance type 3, IEC 62386-303) and a light sensor instance (instance type 4, IEC 62386-304). The products contain no application controller and do not implement IEC 62386-351; they are intended for use with a DALI-2 multi-master application controller on the same bus. All sensor parameters are configured via the DALI interface. Family members differ only in housing colour (white / black). All family members share the same DALI circuit, hardware version and firmware version.
Description
Bus-powered DALI-2 multi-sensor input device, black housing. One logical control device unit with two input instances: instance type 3 - occupancy/movement sensor (IEC 62386-303) and instance type 4 - light sensor (IEC 62386-304). The product has no integrated application controller and must be used together with a DALI-2 multi-master application controller on the same bus. No auxiliary power supply. All sensor parameters are configured via the DALI interface. Certification applies only for DALI communication using the DALI terminals, marked 'DA'. Family member of the IFS05D2 series: differs from the family reference product IFS05D2-CTB-WHT (DiiA Product ID 13579) only in housing colour (black instead of white).
DALI parts and versions
| Part | Version |
|---|---|
| 101 | 3.0 |
| 103 | 2.0 |
| 303 | 2.1 |
| 304 | 2.0 |
Product properties
© 2021 Digital Illumination Interface Alliance. All rights reserved. DALI, the DALI Logo, DALI-2, the DALI-2 Logo, DiiA, the DiiA Logo, D4i,
the D4i Logo, DALI+ and the DALI+ Logo are trademarks in various countries in the exclusive use of the Digital Illumination Interface Alliance.